Log in Register FAQ Memberlist Search pcHDTV Forum Index
pcHDTV Forum

pcHDTV Forum Index -> HD-2000/3000 drivers -> or51132: unknown status 0x64
Post new topic  Reply to topic View previous topic :: View next topic 
or51132: unknown status 0x64
PostPosted: Mon Jan 01, 2007 10:07 pm Reply with quote
pbuelow
 
Joined: 01 Jan 2007
Posts: 3




his is a new one to me. This worked before in FC4, but I've recently upgraded using a clean install to FC6 and now my two HD3000 cards won't give me anything. Here's what I see when the module is loaded, which looks right.

CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 3-0043: chip found @ 0x86 (cx88[0])
tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 3-0061: chip found @ 0xc2 (cx88[0])
tuner 3-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.2[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 209
cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 209, latency: 32, mmio: 0xd9000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)...
CORE cx88[1]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 4-0043: chip found @ 0x86 (cx88[1])
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0061: chip found @ 0xc2 (cx88[1])
tuner 4-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 22 sharing vector 0xE1 and IRQ 22
ACPI: PCI Interrupt 0000:02:09.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 225
cx88[1]/2: found at 0000:02:09.2, rev: 5, irq: 225, latency: 32, mmio: 0xdb000000
cx88[1]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[1]).
DVB: registering frontend 1 (Oren OR51132 VSB/QAM Frontend)...
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 209
cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 209, latency: 32, mmio: 0xd8000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx88[0]/0: registered device radio1
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 225
cx88[1]/0: found at 0000:02:09.0, rev: 5, irq: 225, latency: 32, mmio: 0xda000000
cx88[1]/0: registered device video2 [v4l2]
cx88[1]/0: registered device vbi2
cx88[1]/0: registered device radio2

I have an Hauppage 350 loading just before this BTW. Then towards the end, I see the firmware load.

or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)...
or51132: Version: 10001334-17430000 (133-4-174-3)
or51132: Firmware upload complete.
or51132: unknown status 0x64

It's the unknown status that I think is the problem. Basically, this error is reported when it tries to set the modulation scheme for the driver. I want QAM_256, which is 0x45. Anyway, I have no idea how to get around this, or what the issue is. The SD card works great. I'm hoping someone here knows. Thanks.

_________________
Pete
2 x pcHDTV3000
1 x Hauppage 350
1 x Myth FE/BE combo (will work again!)
1 x Myth FE
View user's profile Send private message Visit poster's website AIM Address
PostPosted: Mon Jan 01, 2007 11:09 pm Reply with quote
xyzzy
 
Joined: 12 Feb 2006
Posts: 225




Try turning the debug option on for the or51132 module.
View user's profile Send private message
PostPosted: Tue Mar 10, 2015 10:54 pm Reply with quote
Romantic
 
Joined: 10 Mar 2015
Posts: 1
Location: Australia




This is extremely decent and nice post....you shook posting it.....Thanks a considerable measure for posting it....!!

_________________
We offer best quality Testking praxis i test test papers and materials. Testking sphr certification preparation
View user's profile Send private message
or51132: unknown status 0x64
  pcHDTV Forum Index -> HD-2000/3000 drivers
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 7 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin