 |
HD-3000 and MythTV setup issue [Solved] |
 |
 Posted: Sat May 21, 2005 9:06 am |
 |
|
| Troy |
|
|
| |
| Joined: 21 May 2005 |
| Posts: 10 |
|
|
|
 |
|
 |
|
I am able to use my HD-3000 card without any issues at all OUTSIDE of Mythtv, however I can not get Mythtv to get any info from the the card. When I run mythtv-setup and go to the capture card setup and select 'Digital Video Broadcast card (DVB)' it tells me beside 'Card Name' 'Could not get card info for card #2' although beside 'Card Type:" it says "Success" Like I said the card works fine using azap or anything outside of mythtv so I know the kernel drivers are correct. Anyone have any ideas? Thanks so much!
Here is part of my dmesg:
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
cx88[0]/0: found at 0000:02:0c.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
tuner 3-0061: chip found @ 0xc2 (cx88[0])
tuner 3-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC))
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x dvb driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.2[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/2: found at 0000:02:0c.2, rev: 5, irq: 16, latency: 32, mmio: 0xfb000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 2 (pcHDTV HD3000 HDTV)...
-Troy |
|
Last edited by Troy on Wed May 25, 2005 10:55 pm; edited 1 time in total |
|
|
|
|
|
Re: HD-3000 and MythTV setup issue |
|
| Posted: Sun May 22, 2005 8:27 am |
|
|
|
| Troy wrote: | I am able to use my HD-3000 card without any issues at all OUTSIDE of Mythtv, however I can not get Mythtv to get any info from the the card. When I run mythtv-setup and go to the capture card setup and select 'Digital Video Broadcast card (DVB)' it tells me beside 'Card Name' 'Could not get card info for card #2' although beside 'Card Type:" it says "Success" Like I said the card works fine using azap or anything outside of mythtv so I know the kernel drivers are correct. Anyone have any ideas? Thanks so much!
Here is part of my dmesg:
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
cx88[0]/0: found at 0000:02:0c.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
tuner 3-0061: chip found @ 0xc2 (cx88[0])
tuner 3-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC))
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x dvb driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.2[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/2: found at 0000:02:0c.2, rev: 5, irq: 16, latency: 32, mmio: 0xfb000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 2 (pcHDTV HD3000 HDTV)...
-Troy |
Hello Troy
Here is my dmesg .. mine says dvb driver instead of v4l2
| Code: |
cx2388x dvb driver version 0.0.4 loaded
cx88[0]/2: found at 0000:06:01.2, rev: 5, irq: 209, latency: 32, mmio: 0xfa000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (pcHDTV HD3000 HDTV)...
pcHDTV HD3000 driver version 2.0.0 loaded
or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)...
or51132: Version: 10001334-17430000 (133-4-174-3)
or51132: Firmware upload complete.
or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)...
or51132: Version: 10001134-19430000 (113-4-194-3)
or51132: Firmware upload complete.
|
How about some background information..
What distribution are you using?
What is the kernel version?
What driver are you loading ..
Myself, I am started with Mandrake 10.1 and upgraded kernel to 2.6.12-rc4.
driver is cx88-dvb
Regards Matt |
|
|
|
|
|
|
Re: HD-3000 and MythTV setup issue |
|
| Posted: Sun May 22, 2005 10:03 am |
|
|
|
Hello Troy
Here is my dmesg .. mine says dvb driver instead of v4l2
| Code: |
cx2388x dvb driver version 0.0.4 loaded
cx88[0]/2: found at 0000:06:01.2, rev: 5, irq: 209, latency: 32, mmio: 0xfa000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (pcHDTV HD3000 HDTV)...
pcHDTV HD3000 driver version 2.0.0 loaded
or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)...
or51132: Version: 10001334-17430000 (133-4-174-3)
or51132: Firmware upload complete.
or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)...
or51132: Version: 10001134-19430000 (113-4-194-3)
or51132: Firmware upload complete.
|
How about some background information..
What distribution are you using?
What is the kernel version?
What driver are you loading ..
Myself, I am started with Mandrake 10.1 and upgraded kernel to 2.6.12-rc4.
driver is cx88-dvb
Regards Matt[/quote]
I'm running Gentoo and the 2.6.12-rc4-mm2 kernel. Now as for as the driver I'm using the one that is part of the mm-sources. Compairing my dmesg from yours the only thing I see different is the very last line:
| Code: |
pcHDTV HD3000 driver version 2.0.0 loaded
|
Did you not use the driver that is part of 2.6.12-rc4?
Thanks for your time!
-Troy |
|
|
|
|
|
|
Re: HD-3000 and MythTV setup issue |
|
| Posted: Sun May 22, 2005 10:10 am |
|
|
|
| Quote: | Hello Troy
Here is my dmesg .. mine says dvb driver instead of v4l2
| Code: |
cx2388x dvb driver version 0.0.4 loaded
cx88[0]/2: found at 0000:06:01.2, rev: 5, irq: 209, latency: 32, mmio: 0xfa000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (pcHDTV HD3000 HDTV)...
pcHDTV HD3000 driver version 2.0.0 loaded
or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)...
or51132: Version: 10001334-17430000 (133-4-174-3)
or51132: Firmware upload complete.
or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)...
or51132: Version: 10001134-19430000 (113-4-194-3)
or51132: Firmware upload complete.
|
How about some background information..
What distribution are you using?
What is the kernel version?
What driver are you loading ..
Myself, I am started with Mandrake 10.1 and upgraded kernel to 2.6.12-rc4.
driver is cx88-dvb
Regards Matt |
I'm running Gentoo and the 2.6.12-rc4-mm2 kernel. Now as for as the driver I'm using the one that is part of the mm-sources. Compairing my dmesg from yours the only thing I see different is the very last line:
| Code: |
pcHDTV HD3000 driver version 2.0.0 loaded
|
Did you not use the driver that is part of 2.6.12-rc4?
Thanks for your time!
-Troy |
|
|
|
|
|
|
|
|
| Posted: Sun May 22, 2005 11:46 am |
|
|
|
Here is the relevant content of my kernel .config file in hopes this may help out.
| Code: |
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_B2C2_SKYSTAR=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_MT312=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT2002=m
CONFIG_DVB_OR51132=m
CONFIG_VIDEO_BUF_DVB=m
|
-Troy |
|
|
|
|
| Posted: Sun May 22, 2005 1:58 pm |
|
|
|
| Anonymous wrote: | Here is the relevant content of my kernel .config file in hopes this may help out.
| Code: |
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_B2C2_SKYSTAR=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_MT312=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT2002=m
CONFIG_DVB_OR51132=m
CONFIG_VIDEO_BUF_DVB=m
|
-Troy |
What do you see under /dev/dvb ? |
|
|
|
|
|
|
|
|
| Posted: Sun May 22, 2005 2:11 pm |
|
|
| Troy |
|
|
| |
| Joined: 21 May 2005 |
| Posts: 10 |
|
|
|
|
|
|
|
| mmorris1 wrote: | | Anonymous wrote: | Here is the relevant content of my kernel .config file in hopes this may help out.
| Code: |
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_B2C2_SKYSTAR=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_MT312=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT2002=m
CONFIG_DVB_OR51132=m
CONFIG_VIDEO_BUF_DVB=m
|
-Troy |
What do you see under /dev/dvb ? |
| Code: |
ls -la /dev/dvb/
total 0
drwxr-xr-x 5 root root 0 May 19 23:27 .
drwxr-xr-x 26 root root 0 May 22 03:10 ..
drwxr-xr-x 2 root root 0 May 19 23:27 adapter0
drwxr-xr-x 2 root root 0 May 19 23:27 adapter1
drwxr-xr-x 2 root root 0 May 20 01:15 adapter2
|
Grant it I do have 2 other dvb cards in this system, so thats why you see 3 adapters. |
|
|
|
|
|
|
|
|
| Posted: Sun May 22, 2005 3:21 pm |
|
|
| Troy |
|
|
| |
| Joined: 21 May 2005 |
| Posts: 10 |
|
|
|
|
|
|
|
Just to show the HD3000 is indeed working:
| Code: |
azap -a 2 -r WFAA
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
tuning to 189000000 Hz
video pid 0x0031, audio pid 0x0034
status 1f | signal e417 | snr fabf | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e188 | snr fa95 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e188 | snr faad | ber 00000000 | unc 00000000 | FE_HAS_LOCK
|
Right after I do that my dmesg is:
| Code: |
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
cx88[0]/0: found at 0000:02:0c.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
tuner 3-0061: chip found @ 0xc2 (cx88[0])
tuner 3-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC))
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x dvb driver version 0.0.4 loaded
ACPI: PCI Interrupt 0000:02:0c.2[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/2: found at 0000:02:0c.2, rev: 5, irq: 16, latency: 32, mmio: 0xfb000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 2 (pcHDTV HD3000 HDTV)...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)...
or51132: Version: 10001134-19430000 (113-4-194-3)
or51132: Firmware upload complete.
|
-Troy |
|
|
|
|
|
|
[Solved] |
|
| Posted: Wed May 25, 2005 10:57 pm |
|
|
| Troy |
|
|
| |
| Joined: 21 May 2005 |
| Posts: 10 |
|
|
|
|
|
|
|
|
|
|
|
pcHDTV Forum Index -> mythTV wiith the HD-2000 card
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
All times are GMT - 7 Hours
Page 1 of 1
|
|
|
|
|
