Log in Register FAQ Memberlist Search pcHDTV Forum Index
pcHDTV Forum

pcHDTV Forum Index -> General pcHDTV topics -> Getting Started Goto page Previous  1, 2
Post new topic  This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic 
PostPosted: Tue Jan 27, 2004 10:13 pm Reply with quote
mk500
 
Joined: 11 Jan 2004
Posts: 51
Location: San Francisco, CA




I noticed a different post where someone had used dmesg > dmesg.txt to post a breakdown of what I believe is the detailed initialization process? Anyway, I did the same with my existing kernel, and it looks like something is broken here. This might be a clue. Here is the data (sorry for the length of the post).

Code:

Linux version 2.4.22 (root@watcher.cthub.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #2 Tue Jan 27 15:22:28 PST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
 BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
 BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
247MB LOWMEM available.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 800.043 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1595.80 BogoMIPS
Memory: 248084k/253888k available (1474k kernel code, 5416k reserved, 381k data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
CPU:     After generic, caps: 00803135 80803035 00000000 00000000
CPU:             Common caps: 00803135 80803035 00000000 00000000
CPU: Centaur VIA Ezra stepping 08
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/0601] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 15 (usb?)
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:40:63:c0:96:47, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 40a1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected Via Apollo PLE133 chipset
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Unknown @ 0xd0000000 256MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Unknown @ 0xd0000000 256MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD1200AB-00CBA1, ATA DISK drive
blk: queue c033d4c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: VIA97 (Unknown)
via82cxxx: board #1 at 0xDC00, IRQ 5
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 15:22:47 Jan 27 2004
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 3
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 3
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Linux video capture interface: v1.00
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 83k freed
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 272k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1052248k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.104 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8601 [Apollo ProMedia]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:14.0, irq: 10, latency: 32, mmio: 0xe3001000
bttv0: detected: pcHDTV HD-2000 TV [card=100], PCI subsystem ID is 7063:2000
bttv0: using: BT878(pcHDTV HD-2000 TV) [card=100,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=40
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
tuner: type set to 40 (Philips 1236D ATSC/NTSC daul in)
i2c-core.o: client [Philips 1236D ATSC/NTSC daul in] registered to adapter [bt848 #0](pos. 0).
invalid operand: 0000
CPU:    0
EIP:    0010:[<d00d8714>]    Not tainted
EFLAGS: 00010202
eax: 00000000   ebx: 00000240   ecx: d00e3ca0   edx: d00e3ca0
esi: 00000001   edi: d00e3ca0   ebp: 00000140   esp: cc0dfdc8
ds: 0018   es: 0018   ss: 0018
Process modprobe (pid: 24580, stackpage=cc0df000)
Stack: c0118710 00000000 cc0de000 00000000 00000000 00000000 cc0de000 00000000
       00000000 cc0de000 00006005 00000000 00000000 d00ea4e0 cc0dfe48 40046d11
       d00dbad8 ce3106e0 00000080 cc0dfe48 00000000 00000010 d00ea4e0 d00e3ca0
Call Trace:    [<c0118710>] [<d00ea4e0>] [<d00dbad8>] [<d00ea4e0>] [<d00e3ca0>]
  [<d00d4036>] [<d00ea4e0>] [<d00e3ca0>] [<d00ea4e0>] [<d00d7505>] [<d00ea4e0>]
  [<d00ea4e0>] [<d00d81f7>] [<d00ea4e0>] [<d00d7b68>] [<d00e0b59>] [<d00ea4e0>]
  [<d00e40f8>] [<d00e4160>] [<c02025d1>] [<d00e40f8>] [<d00e4160>] [<c0202667>]
  [<d00e4160>] [<d00d839a>] [<d00e4160>] [<c011660d>] [<d00e21d0>] [<d00d2060>]
  [<d00d2060>] [<c0108f53>]

Code: 0f 45 44 24 48 89 44 24 48 0f b7 52 04 89 54 24 44 8b 51 10
View user's profile Send private message AIM Address
PostPosted: Fri Jan 30, 2004 1:54 pm Reply with quote
Scott Larson
 
Joined: 15 Oct 2003
Posts: 713
Location: Portland, OR




I got it all working on a reinstalled RedHat 9 box with a 2.4.22 kernel I got from kernel.org a few days ago. If you want I'll be glad to compare kernel source and config files with you. Once you get everything is perfect it will work like magic.
View user's profile Send private message
PostPosted: Fri Jan 30, 2004 7:08 pm Reply with quote
mk500
 
Joined: 11 Jan 2004
Posts: 51
Location: San Francisco, CA




Scott Larson wrote:
I got it all working on a reinstalled RedHat 9 box with a 2.4.22 kernel I got from kernel.org a few days ago. If you want I'll be glad to compare kernel source and config files with you. Once you get everything is perfect it will work like magic.


Thanks Scott. I'm currently working on 2.4.22-1.2115 which was included with Fedora. Is yours similar?

Would you be willing to email me your working .config file? Maybe I could do a diff and figure out what might be a problem in mine.

mk500(at)cthub.com
View user's profile Send private message AIM Address
Getting Started
  pcHDTV Forum Index -> General pcHDTV topics
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 7 Hours  
Page 2 of 2  
Goto page Previous  1, 2
  
  
 Post new topic  This topic is locked: you cannot edit posts or make replies.  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin