Log in Register FAQ Memberlist Search pcHDTV Forum Index
pcHDTV Forum

pcHDTV Forum Index -> Installation/Setup -> Fusion HDTV 5 scan problem in linux 2.4.20
Post new topic  This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic 
Fusion HDTV 5 scan problem in linux 2.4.20
PostPosted: Mon Jul 03, 2006 3:20 am Reply with quote
sundara
 
Joined: 27 Jun 2006
Posts: 1




Hi All,

I am able to scan HDTV in 2.6.16 version but I need to port this for 2.4.20 kernel.

In 2.4.20 version, I am using pcHDTV-1.6.tar.gz, in that after adding the card support i could not tune the digital signal..

Quote:
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
pcHDTV HD3000 Driver Version 1.6
PCI: Found IRQ 12 for device 00:0c.0
PCI: Sharing IRQ 12 with 00:0c.1
PCI: Sharing IRQ 12 with 00:0c.2
PCI: Sharing IRQ 12 with 00:10.3
cx8800[0]: found at 00:0c.0, rev: 5, irq: 12, latency: 32, mmio: 0xec000000
cx8800[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=11,autodetected]
i2c-dev.o: Registered 'cx8800[0]' as minor 0
i2c-core.o: adapter cx8800[0] registered as adapter 0.
cx8800[0]: i2c register ok
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found at addr 0xc2 i2c-bus cx8800[0]
tuner: type set to 52 (LG TDVS-H062F/TUA6034) by cx8800[0]
cx8800[0]: i2c attach [client=LG TDVS-H062F/TUA6034]
i2c-core.o: client [LG TDVS-H062F/TUA6034] registered to adapter [cx8800[0]](pos. 0).i2c-core.o: driver i2c tda9887 driver registered.
tda9885/6/7: chip found @ 0x86
cx8800[0]: i2c attach [client=tda9887]
i2c-core.o: client [tda9887] registered to adapter [cx8800[0]](pos. 1).
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
dev->dtv_nr is [-1054707968]
cx88: registered device dtv0
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.


When i tune (dtvscan) it is spiting following error

Quote:
88atsc dvr error g
cx88atsc dvr error g
cx88atsc dvr error g
cx88atsc dvr error g
cx88atsc dvr error g
cx88atsc dvr error g
cx88atsc dvr error g


At this moment atleast i have to check wheather the singal is LOCK or Not LOCKed...

And, I have some general doubt.. I saw some difference in cx88 driver 0.0.4 and the cx88 driver in 2.6.16 kernel. There are some files cx88_blackbird and cx8802 is they really required in 2.4.20!!!! Rolling Eyes

Please give ur valuable suggestion.. I have searched in web there is no exact information for the problem.

Thanks in advance.
Sundara
View user's profile Send private message
Fusion HDTV 5 scan problem in linux 2.4.20
  pcHDTV Forum Index -> Installation/Setup
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 7 Hours  
Page 1 of 1  

  
  
 Post new topic  This topic is locked: you cannot edit posts or make replies.  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin