Log in Register FAQ Memberlist Search pcHDTV Forum Index
pcHDTV Forum

pcHDTV Forum Index -> Installation/Setup -> no channels?
Post new topic  This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic 
no channels?
PostPosted: Sat Aug 26, 2006 8:34 pm Reply with quote
lschvart
 
Joined: 26 Aug 2006
Posts: 2




Hi,

I am running Suse 10.0 and just got the drivers installed for the hd-5500 by following the instructions in HOWTO.suse10.0. I connected my Comcast cable to the hd-5500, but the card doesn't seem to be working.

I have two questions for now:
1) Are my drivers installed properly?
2) Why do I get an empty file when I run dtvscan -q -o channels.conf?


Here is some additional info for 1)

dmesg | grep cx88
cx88xx: module not supported by Novell, setting U taint flag.
cx8800: module not supported by Novell, setting U taint flag.
CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected]
cx88_alsa: module not supported by Novell, setting U taint flag.
cx88[0]/0: found at 0000:03:01.0, rev: 5, irq: 177, latency: 64, mmio: 0xdb000000
tuner 1-0061: chip found @ 0xc2 (cx88[0])
tda9887 1-0043: chip found @ 0x86 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88_vp3054_i2c: module not supported by Novell, setting U taint flag.
cx8802: module not supported by Novell, setting U taint flag.
cx88_dvb: module not supported by Novell, setting U taint flag.
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]/2: found at 0000:03:01.2, rev: 5, irq: 177, latency: 64, mmio: 0xdd000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
cx88_blackbird: module not supported by Novell, setting U taint flag.



Here's some additional info for 2)
dtvscan -d 0 -q -o channels.conf or
dtvscan -q -o channels.conf

both create an empty channels.conf


when I run dtvscan, dmesg shows:

KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
lgdt330x: lgdt330x_set_parameters: Modulation type(6) UNSUPPORTED
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value

etc
etc
etc
View user's profile Send private message
PostPosted: Tue Aug 29, 2006 1:56 pm Reply with quote
nybbler
 
Joined: 06 Jul 2006
Posts: 125




DTVScan uses QAM_AUTO. The 5500 doesn't support that, you'll have to change it to QAM_256.
View user's profile Send private message
no channels?
  pcHDTV Forum Index -> Installation/Setup
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 7 Hours  
Page 1 of 1  

  
  
 Post new topic  This topic is locked: you cannot edit posts or make replies.  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin