Log in Register FAQ Memberlist Search pcHDTV Forum Index
pcHDTV Forum

pcHDTV Forum Index -> General pcHDTV topics -> Personal fix for people with problem with driver problems...
Post new topic  This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic 
Personal fix for people with problem with driver problems...
PostPosted: Sun Nov 21, 2004 5:53 pm Reply with quote
smalenfant
 
Joined: 11 Nov 2004
Posts: 14
Location: Georgia




I made my HD3000 card works... those set mode errors are gone for me...

before line 2594 in cx88-atsc.c,
Code:
        if(2 != i2c_master_send(&dev->i2c_client,run_buf,2)) {

insert a #ifdef STEVE

Before this :
Code:
        rec_buf[0]=0x04;
        rec_buf[1]=0x00;
        rec_buf[2]=0x03;
        rec_buf[3]=0x00;

Inset #endif // STEVE

These lines :
Code:
        if(5 != i2c_master_send(&dev->i2c_client,cmd_buf,5)) {
                printk(KERN_WARNING "cx88atsc load_dvr error 5\n");
                return;
        }


They look a bit fishy... cmd_buf doesn't seems to be initialized, so garbage is probably sent to the card... But it doesn't really matter the second i2c_master_send time outs anyway...

That worked for me... This could work for you Smile

Also, make sure that there is no conflicting drivers in the /lib/modules/KERNEL/updates/drivers/media/video. If there is, remove them or copy your kernel module in there as well...

I also got some issues in Atlanta with Channel 11... It takes about 20 seconds before it can lock on the signal... That will cause me some big issues in MythTV. The signal level is 78 after being locked.

Good luck.
View user's profile Send private message
PostPosted: Mon Nov 22, 2004 6:49 am Reply with quote
smalenfant
 
Joined: 11 Nov 2004
Posts: 14
Location: Georgia




Installing the latest driver (1.2) from HD3000-HD2000-CD-rev3.tar.gz(11/19/04 ) worked for me.
View user's profile Send private message
Personal fix for people with problem with driver problems...
  pcHDTV Forum Index -> General pcHDTV topics
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 7 Hours  
Page 1 of 1  

  
  
 Post new topic  This topic is locked: you cannot edit posts or make replies.  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin