 |
HDTV channels in dtvscan but NOT in MythTV Setup with 5500? |
 |
 Posted: Fri Apr 06, 2007 3:38 pm |
 |
|
| djseto |
|
|
| |
| Joined: 06 Apr 2007 |
| Posts: 15 |
|
|
|
 |
|
 |
|
When I run ./dtvscan, I get the following
dtvscan ver 1.0.4 - by Jack Kelliher (c) 2002,2005,2006
Attempting to open /dev/dtv
Opened FE:/dev/dvb/adapter0/frontend0 3
Opened DMX:/dev/dvb/adapter0/demux0 4
Opened DVR:/dev/dvb/adapter0/dvr0 5
channel = 2 VSB_8
Signal: 80
look for sync
PAT found ckets
WGCL-HD:57000000:8VSB:0x31:0x34:0x03
channel = 3 VSB_8
Signal: 47
Signal: 83
look for sync
PAT found ckets
PAT found ckets
PAT found ckets
WSB-DT_:63000000:8VSB:0x11:0x14:0x01
WSB-DT_:63000000:8VSB:0x21:0x24:0x02
channel = 4 VSB_8
Signal: 55
look for sync
PAT found ckets
PAT found ckets
WXIA-DT:69000000:8VSB:0x31:0x34:0x03
WXIA-SD:69000000:8VSB:0x41:0x44:0x04
channel = 5 VSB_8
Signal: 30
Signal: 85
look for sync
PAT found ckets
PAT found ckets
WTBS-HD:79000000:8VSB:0x31:0x34:0x03
channel = 6 VSB_8
Signal: 38
Signal: 81
look for sync
PAT found ckets
PAT found ckets
PAT found ckets
PAT found ckets
PAT found ckets
WAGA-HD:85000000:8VSB:0x31:0x34:0x03
WAGA-SD:85000000:8VSB:0x41:0x44:0x04
channel = 7 VSB_8
^Xchannel = 8 VSB_8
channel = 9 VSB_8
channel = 10 VSB_8
channel = 11 VSB_8
Signal: 47
Signal: 85
look for sync
PAT found ckets
PAT found ckets
PAT found ckets
PAT found ckets
WAGA-HD:201000000:8VSB:0x31:0x34:0x03
WAGA-SD:201000000:8VSB:0x41:0x44:0x04
I assume this means the card is picking up the HD channels, but when I run the different scans when trying to setup my MythTV, I keep getting "Timeout Scanning ATSC Channel XX -- No Signal"
I chose my card type as "pcHDTV DTV capture card (w/4VL drivers)" and got nothing. I also tried "DVB DTV capture card (v3.x)" and got nothing. What am I doing wrong??
Also, there are (2) 5500 cards installed and I want to use them both for HD and Analog recording/playback. Is there anything special I need to do?
Thanks |
|
|
|
|
|
|
|
|
| Posted: Fri Apr 06, 2007 7:28 pm |
|
|
| waterhead |
|
|
| |
| Joined: 24 Apr 2005 |
| Posts: 298 |
|
|
|
|
|
|
|
Do not use the pchdtv v4l drivers. You should be using the dvb driver. I have the HD-3000, so I can't tell you what it should say if your HD-5500 is recognized.
Is the driver module loaded? You need the cx88-dvb. Enter: lsmod (as root) and it will show the modules loaded. If not, enter: modprobe cx88-dvb.
You also should have a current kernel version. |
|
_________________
Mythbuntu 8.04
Intel D875PBZ main board
Pentium4 3.06Ghz
1024GB RAM
nVidia 6600GT
pcHDTV HD-3000
Air2PC PCI
MythTV 0.21 |
|
|
|
|
|
|
|
| Posted: Sat Apr 07, 2007 11:28 am |
|
|
| djseto |
|
|
| |
| Joined: 06 Apr 2007 |
| Posts: 15 |
|
|
|
|
|
|
|
| waterhead wrote: | Do not use the pchdtv v4l drivers. You should be using the dvb driver. I have the HD-3000, so I can't tell you what it should say if your HD-5500 is recognized.
Is the driver module loaded? You need the cx88-dvb. Enter: lsmod (as root) and it will show the modules loaded. If not, enter: modprobe cx88-dvb.
You also should have a current kernel version. |
I now have found the HD channels using the DVB driver, but now I can't get it to caputure the standard cable QAM-64 channels. When I look at the input connections in MythTV, it shows DVB:1 and then below it, it shows [V4L:/dev/video1], which i assume is the analog portion of the card, but when I try to scan the channels, it returns nothing. Do I need to use the DVB driver for HD and then use the V4L drivers by "adding" another capture card under the V4L drivers? |
|
|
|
|
|
|
|
|
| Posted: Sat Apr 07, 2007 4:43 pm |
|
|
| waterhead |
|
|
| |
| Joined: 24 Apr 2005 |
| Posts: 298 |
|
|
|
|
|
|
|
| I haven't tried to set up both tuners in my card. Other posters on this subject say that you set up the analog side within the dvb set up (like you have seen). I think that you now need to set up the inputs and stuff. You shouldn't need to add another card. |
|
_________________
Mythbuntu 8.04
Intel D875PBZ main board
Pentium4 3.06Ghz
1024GB RAM
nVidia 6600GT
pcHDTV HD-3000
Air2PC PCI
MythTV 0.21 |
|
|
|
pcHDTV Forum Index -> Installation/Setup
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
All times are GMT - 7 Hours
Page 1 of 1
|
|
|
|
|
